As you may already know, I enjoy using pallet wood on my projects. So when a friend gave me a few kitchen knives with broken handles, I figured that I’d try making a handle out of pallet wood.
The handles were made out of very inferior plastic, which had splintered and broken off. These knives were likely offered for sale on an American television commercial – “Order these Ginsu carving knives now, and receive a bamboo steamer as a free gift.” I wonder if she has the bamboo steamer?
Anyway, I was able to salvage one handle as a pattern. I traced the plastic handle onto the pallet wood.
Some pallets are made of hard woods, probably walnut or oak. I chose a piece that seemed fairly hard. I cut out two handles and then cut each one down the middle.
Here you can see one of the original black plastic handles.
I drilled holes to attach the handles to the blade, then lightly sanded each piece and coated with Varathane,
I attached the handles using small screws. Unfortunately, when drilling a hole to countersink the nut, I chipped the wood.
No worries, this was my first attempt and is now a resident in my fishing tackle box.
A fun project reusing two items that would likely have found their way into a landfill.
Renovating a 1970’s kitchen on a small budget is not easy to do. However, that is what a friend asked me to help her accomplish.
The kitchen was extremely small and dark. Of course, my first thought was to paint the kitchen cabinets a light color. She didn’t want white, and decided that a nice blue-gray would do the trick.
Since the kitchen was so small, I suggested that some of the cabinet door centers be cut out and glass added. This would make the opening of the kitchen appear wider and add some depth as well.
I began by removing and cleaning up the cabinet doors. Next, I laid out the cut lines and drilled a hole in one corner so that the saber saw blade could be inserted.
After about 15 minutes of cutting, the door center could be removed. I saved the center piece of wood for a future project.
How to install the glass? That was my new issue. I figured that I would route out the back side of the door – only one problem, I don’t own a router. My friend had a great suggestion to just add a small edge of wood to the cutout, leaving space to support the glass.
I used some 3/8″ square pine to frame-up the cutout. I secured each piece in place with glue and small finishing nails. It actually added a nice detail to the front of the door and – no routing required!
I took the first two doors to a glass shop. My friend selected a glass pattern that she had seen years ago while visiting Ireland.
They cut and installed the glass, and interestingly, they used clear silicon to secure the glass in place. It cost about $70.00/door for the glass and labor.
Prior to hanging the doors, I refurbished the old hinges, a subject of a future post. I also installed new pull knobs, which she had previously selected.
I painted the upper cabinets 50% lighter than the bottom. I simply mixed 50/50 blue-gray with white paint. This optically makes the upper cabinets appear a little further back, making the kitchen seem larger. When you have a small space, these tricks add up!
I completed four doors in total and as you can see, it really updated the kitchen! The original estimate for new cabinets and installation was $10,000. So far, the kitchen has cost $450.00. That’s paint, knobs and glass. Of course, she got a great deal on labor!
With the money she saved, she purchased a new counter-depth refrigerator, keeping the kitchen opening as wide as possible. I think it really added to the “new” look.
Now the old countertops are next on her list. Did you know that they can be painted? A new project has been born!
Mr. G's Mind 