Author Archives: depolorization

Waterfall and Leaf Framed Photo

Posted on by

Several months ago my friend and I went on a trek through the Pacific Northwest. Of course, Oregon has some amazing waterfalls, and I was fortunate enough to capture a few good images of them.

One night, we stayed at a hotel in downtown Ashland, Oregon – a very cool town by the way. The hotel had a lot of old nature postcards of the local area, framed and hanging on the walls. In addition to the old postcard, the designer also added a local leaf from an indigenous tree, which was secured to the frame’s mat. I thought it was a really interesting way to present photos and local flora, and decided to give it a try myself.

I wanted the photo to look like an old time postcard. Usually, the colors are pretty saturated. I began with an image I liked, and used the photo editor on my phone to change things up a bit. The first photo below is the original. After brightening up and adding some color, I was happy with the final (second) image.

After printing the image on glossy photo paper, I cut it to about 3″ x 5″, the approximate size of a postcard. Then I cut a piece of mat board the same size and glued the photo to it. The photo now had the look and the thickness of a postcard.

I then glued the 3″ x 5″ photo onto a piece of mat board that fit my frame. I left extra room at the bottom so a leaf could be added.

The redwood tree leaves that I had gathered needed a little flattening prior to securing to the mat board. I placed them on a piece of plywood, put a second piece on top, and then added a brick for weight. I let that sit overnight.

I positioned the leaf on the mat board, secured it with white glue, and held in place with my harmonica. Hey, it was nearby.

Once the glue was dry, I placed the final work into the frame.

I am really happy with the way it turned out and will definitely do another one. This time from the Great State of Washington!

Cabana Skylight Project

Posted on by

As I write this post, I am sitting in my backyard cabana – also known as the fort or wine shed. I could not have done this last year, as there was just not enough air circulation. Even with the door open, it just got too hot inside.

When I decided to put a new roof on the cabana, I thought why not add a skylight, that way the hot air would flow up and out. I had never done any roofing or skylight work, so first I watched a lot of “how to” web videos.

Next, I removed the old cedar shingles. A pretty big job in itself, even though the cabana is only a 6′ x 9′ space.

My first idea was to raise the angle of the back sloped roof, so that I could add clerestory windows. I tacked up a couple of pieces of wood to get an idea of what the new roof line would look like. I decided that it was going to be too much work, and might look too tall as well.

Once the back side of the roof shingles were removed, I tore off the old tar paper. I decided it was a good time for a break, so I layed down inside the cabana and came up with a simple idea.

Why not use a piece of tinted 2′ x 8′ corrugated plastic, with a frame and hinges so that it could be opened and closed. Seemed so much simpler to me.

Below, I constructed the skylight frame and attached it to the roof. I used a piece of scrap with notches in it to prop it open. It looked great to me, half the roof opens up! Might make a great observatory for night sky viewing too (hmmm, good idea). Plus, you could not even see the skylight from the front of the cabana. Little did I know, things were going to get tougher.

Since I had removed the shingles, I had to sheath the roof with plywood. That job was not too difficult, but the next task was much more challenging.

Videos always make things look easy. Since I now had a skylight, I had to flash it with metal to prevent water from seeping in. I bought some rolled aluminum that I would be able to cut with tin snips and bend using my hands and a piece of wood. Not a simple task, and it took me a couple of days to get it all done.

Even after the flashing is made, you have to install it so that it underlaps at the top joints, and overlaps at the bottom joints. In doing so, the rain will not seep in. Very tricky, so watch the web videos over and over.

Next, I added the roll roofing and the asphalt shakes. There is a specific method for putting the shakes on. It’s not really hard, but you have to do it as specified. The shake packs that I purchased had instructions on how to apply them. Again, watch videos as well!

Below, all the roof shakes are on and I am just finishing up the the ridge cap shakes. You can clearly see the flashing around the skylight.

Below was the first rainstorm. It really sounded amazing inside! I had one small leak, but tracked it down and fixed it with a bit of tar.

This was a big job for me and took quite a bit of planning and work. Not so sure I’d want to do it again. However, I am so happy that I did do it and now use the cabana almost every day.

It’s a wonderful, light-filled space for creating new ideas, sipping wine or both – usually both!